If You Transfer A Memory Stick From One Camera To Another What Happens?

memorycard101feat

My proper noun is Jeff Cable, and I'm a lensman based in the San Francisco Bay Area. I previously spent many years of my life equally Director of Marketing at Lexar dealing with the ins and outs of the retentiveness card concern. And in all that time, I have never written nigh the do's and don'ts of retentivity cards. Now that I am non on that side of the concern any more, I feel that I tin can write this objective piece for you without any conflict of interest.

And if you are taking digital photos on a memory carte du jour (and yous probably are), you will want to read this!

First, let me explain the retentivity bill of fare in simple terms for you lot.

Most people expect at a retentiveness card equally a piece of plastic or metal, and they don't remember much about them. Merely inside those covers, there is a lot of intelligence. There is flash memory, a controller and much more. The quality of that retentivity and controller often determines the speed and quality of your card.

edit_lexar1066x

Your memory menu has something called a File Allocation Table, otherwise known equally a Fat Table. Think of your memory bill of fare as a volume and the Fat Tabular array as a Table of Contents. When you format a retention card, you are non really erasing the card, you are just clearing the FAT Table. Then… y'all have removed the Table of Contents, but the chapters of the book still remain. Yep, all the images will remain on your menu until you shoot more than and overwrite them. This is why y'all can utilize a program like Lexar's Image Rescue, SanDisk's Rescue Pro or other data recovery software to recover images from a carte even after it is formatted.

Memory Card Tips

And at present for the tips, which I am going to write in the order of importance:

#1. Exercise NOT erase images from your memory card in your camera!

Clarification: What I mean past this is: Practice not go through your photos and delete them ane past i using your camera.

I come across people (including professional photographers) doing this all the time and information technology is a actually bad idea. Your camera is awesome at taking photos, but information technology is not very smart at managing the data on your memory bill of fare. Deleting individual images from the card using your camera is a dandy way to scramble the FAT Table. Don't do information technology!

And heck, retentivity cards have gotten and then inexpensive and large, that you should not take to delete images to save space. Just popular in a new card and keep shooting. One time y'all have downloaded to your figurer and backed up the images, then format your card to use it again.

#2. Format your memory cards in your camera, not on your computer

I accept seen countless web sites which tell people to format their memory cards on your figurer. This is just bad information! You want to format the cards in the photographic camera. And y'all should do this on the photographic camera your are shooting with. I am currently shooting with the Catechism 1D Ten Mark 2, Catechism 1D Ten, Canon 5D Marking 4 and Canon 5D Mark III, and I format the carte in the camera I am using.

You are reading this correctly… I practise not format in one Canon camera and move it to some other. Will they work? Aye, they will. But it could crusade bug down the road. Speaking of this, it is not a proficient thought to pull a retentivity menu out of one camera model and putting it into some other without formatting. I accept seen people shooting with a Catechism camera, pull the card out and start using it in a Nikon photographic camera. They like to be formatted a certain fashion and each manufacturer does information technology their own style.

#iii. Speaking of formatting, it is a good idea to format your cards afterward each shoot

Once yous have downloaded your bill of fare and take the images in more than than ane place, you should format that carte before its next use. It keeps things cleaner on the card.

edit_lexar3500x_reader

#4. Utilize a skilful card reader!

I tin not tell you how many times I have seen professional person photographers take a high quality card out of a $10,000 camera and put it into a cheap no-name reader. Ughh, it just kills me. When I was working at Lexar and a customer would call me virtually a corrupted retentiveness card, i of my showtime questions I would ask is "What carte du jour reader are you using?"

Folks, those retentiveness card readers have intelligent controllers inside them, just like the cards! I have seen way more cards corrupted in a reader than in a camera.

#5. Don't fill a bill of fare completely

Fifty-fifty though about memory cards are built really well and have all kinds of intelligence in them, it is non a good idea to fill a card completely. One of the reasons that I beloved shooting with large retention cards is and so that I have tons of caput room to shoot a lot of photos and not worry nearly overfilling the card.

FYI, I also have the same mentality with my computer difficult drives. I never fill them, considering their operation suffers a lot when they are full. I usually fill up a hard drive to a maximum of 90% and and so start writing to a new 1.

#6. Don't pull a memory card out of your photographic camera or card reader when data is existence written or read from the card

If data is being transferred to or from the carte du jour and that procedure is interrupted, it is quite possible that you volition lose some or all of your photos. And don't always trust the red light on your camera to decide is data is beingness transferred. Before I pull my memory cards, I always look an extra couple of seconds after the red light on the cameras goes off, signifying that the data is washed being written to the card.

edit_lexar3500x

#7. If yous have ii menu slots in your camera, write your images redundantly to both cards to have more than peace of mind

This style, if ane bill of fare gets corrupted, you lot can virtually probable get the images off of the other menu. I always practise this!

#8. Purchase name brand memory cards

As you may have guessed, I employ Lexar retentiveness cards in all my cameras, simply that is not to say that they are the merely good company out at that place. SanDisk makes a good product likewise. In that location are others too, just make certain that yous practise not use one of those cards made by a no-named company.

Remember: yous are trusting your images to the card!

And y'all are going to be using the card over and over, so spending a couple of dollars more than to get a better product, in the long term, will not cost you much more. Nothing kills me more than seeing someone shooting with a great camera, expensive lens and a crappy retentiveness card. Yep, this gets to me even more than someone using a crappy reader.

Memory Card Misconceptions

And just for fun, here are a couple of common misconceptions about memory cards:

If retentivity cards become dropped in water, the data will be lost forever!

This is not true. Because memory cards are made with solid state memory, information technology is not uncommon for them to go through the washer and dryer and still be useable. Would I keep using that carte later a state of affairs like this? Probably non. But most likely your information will withal be on the carte and can be recovered. I used to jokingly say to people, "If you put your carte through the washer, make to put it in the dryer too!"

You must continue your cards in covers

I hate to tell you this folks, but I accept my cards loose in my bags all the time. I do not utilize the petty jewel cases that come with the cards. I do use the ThinkTank Pixel PocketRockets, but likewise have endless cards thrown in my bags. This has never been an outcome.

In Conclusion

To sum all this upward…

After reading this blog post, I hope you lot take a amend understanding of your retention cards and readers and appreciate them a little more. At that place is and then much technology packed into these devices, merely they are and so small and unassuming that information technology is piece of cake to take them for granted.

These are simple tips that could save you from a disastrous situation. I hope that these help all of y'all to continue your retentivity cards and images rubber now and in the futurity.

P.S. In example you are wondering…hither are the cards and readers I am currently using: Lexar Professional 1066x CompactFlash, Lexar Professional 3500x CFast, Lexar Professional 2000x SD, and Lexar HR2 Workflow Reader Solution.

You can subscribe to Jeff Cable'southward photography newsletter by entering your electronic mail at the top of his blog.

Well-nigh the author: Jeff Cable is a lensman based in the San Francisco Bay Area. You can detect more than of his work on his website, weblog, Facebook, and Instagram. This commodity was also published here.

Source: https://petapixel.com/2016/12/07/dos-donts-memory-cards-tips-photographers/

Posted by: loftonbetwou.blogspot.com